- Mon - Sat : 9:00 - 17:00
- + 91-9924300407
- saffromellow@yahoo.com
| No. | Type | WALL BIND Acrylic Interior Wall Primer (Water Thinnable) is suitable for useas a primer for painting of waterbased wall finishes such as distemper and plastic emulsions. |
|---|---|---|
| 1 | FEATURES | WALL BIND has a special features are better whitness and opacity, easy brushing, excellent covering,alkali resistance,quick drying and good filling properties. Provides superior hiding and superior whiteness. |
| 2 | RECOMMENDED APPLICATION | WALL BIND can be used for priming plastered wall,asbestose,brick work,cement concrete etc. |
| No | COLOURS | White |
|---|---|---|
| 1. | FINISH | Smooth and matt |
| 2. | COVERAGE | 1 coat: 130-140 sq.ft/ltr 2 coats: 80-90 sq.ft/ltr(It may vary due to factors such as methods and conditions during application and surface roughness etc.) |
| 3. | DRYING TIME | Surface drying time – 10-15 minutes |
| 4. | GLOSS LEVELS/SHEEN LEVELS | NA |
| 5. | FLASH POINT (IS101/108 Part 1, Sec 9) | Non- flammable |
| 6. | SUITABILITY OF THINNER PAINT | Use within 24 hrs. |
| 7. | SHELF LIFE | 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. |
| 2. | REMARKS | a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning. |
|---|
| No | PLASTER : | New masonary surface must be allowed to curecompletely.It is recommended to allow 28 days as the curing time for new masonary surfaces. |
|---|---|---|
| 1. | CLEANING : | Surface should be free from any loose paint,dust or grease.Growth of fungus, algae or moss should be removed by wire brushing and water. |
| 2. | FILLING FOR CRACKS,HOLES AND DENTS : | In case of dents ,cracks and hole use SAFFRO'S SUMO acrylic wall putty or WALL GUARD white cement based wall putty. |
| No | PRODUCT | THINNER | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
|---|---|---|---|---|---|
| 1. | Sand the surface with emery paper No.180 and wipe | ||||
| 2. | Saffro’s Nano primer water thinnable,1st coat by brush | water | 80-100 | 20-22 | 4-6 hrs |
| 3. | Saffro’s Wall Putty(optional): smoothern the surface by filling dents with thin coat of saffro's SUMO acrylic wall putty/WALL GUARD white cement based putty allow it to dry for 4-6 hours | ||||
| 4. | Sand the Surface lightly with emery paper 180 and Wipe | ||||
| 5. | Saffro’s Nano primer water thinnable,2nd coat by brushing on putties area | Water | 80-100 | 20-22 | 4-6 hrs |
| 6. | Safety Features : | Non-flammable | |||
| 7. | Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. |
