- Mon - Sat : 9:00 - 17:00
- + 91-9924300407
- saffromellow@yahoo.com
ULTRA PREMIUM weatherproof interior and exterior emulsion is a smooth, water-based, modified acrylic, interior and exterior wall finish with silicon additives.
ULTRA PREMIUM weatherproof interior and exterior emulsion is specially formulated to withstand extreme tropical conditions of rainfall, humidity and heat
ULTRA PREMIUM provides excellent resistance from growth of algae and fungi on the walls. This prevents appearance of black spots due to algal growth.
ULTRA PREMIUM provides extremely good protection against alkali and UV degradation, thus ensuring that the shade doesn’t fade for a long time and the paint lasts longer.
ULTRA PREMIUM Acrylic interior and exterior emulsion is interior and exterior wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
| COLOURS : | White & other shades |
|---|---|
| FINISH : | Smooth and soft sheen |
| COVERAGE : | On smooth primer masonry surface by brushing 1 coat: 140-170 sq. ft/ltr2 coats: 85-95 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc) |
| DRYING TIME : | Surface drying time – 30 minutes |
| GLOSS LEVELS/SHEEN LEVELS : | Silky smooth with soft sheen |
| FLASH POINT (IS101/108 Part 1, Sec 9) : | Non- flammable |
| SUITABILITY OF THINNER PAINT | Use within 24 hrs. |
| SHELF LIFE | 18 month from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. |
| ABRASION RESISTANCE : | Excellent |
|---|---|
| WATER RESISTANCE : | Excellent |
| REMARKS : | 1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. 2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. 3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. 4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints. 5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. 6) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. 7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. 8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning. |
| Product : | Thinner | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
|---|---|---|---|---|
| SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
| SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
| SAFFRO’s ULTRA PREMIUM Acrylic Interior and exterior Emulsion by Brush, Spray, Roller : | Water | B-40-60 S-70-75 | B-20-30 S-20-25 | 3-4 hrs |
| (B=Brushing, S=Spraying) | ||||
| N.B. For Interior and exterior purpose we recommended SAFFRO’s WALL PROTECT Interior and exterior Wall Primer. | ||||
| Safety Features : | Non-flammable | |||
| Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. |
