Velvet Glow Emulsion (Interior & Exterior)

Saffro Mellow Coatings And Resins

Velvet Glow Emulsion (Interior & Exterior)

No. Type Pure Acrylic Emulsion with high sheen.
1 FEATURES It provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
2 RECOMMENDED APPLICATION STAR valvet glow emulsion is an interior and exterior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.


No COLOURS White & other shades as per shade cards
1. FINISH Smooth and high sheen
2. COVERAGE On smooth primer masonry surface by brushing
1 coat: 140-160 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time – 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS Silky smooth with high sheen
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
7. SHELF LIFE 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.


2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins STAR velvet glow emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.


No PRODUCT THINNER Dilution % by Vol Application Viscosity in Sec Recoating Period (Hrs)
1. Sand the surface with emery paper No.100 and wipe
2. Saffro’s Cement (Water or Solvent based) Wall Primer MTO or Water B- 8-10, S- 15-20 B-30-40, S-20-25 6-8 hrs
3. Saffro’s Wall Putty Water Small amount of water flow 4-6 hrs
4. Sand the Surface with emery paper and Wipe
5. Saffro’s Cement(Water or Solvent based) Wall Primer Water or MTO B- 8-10, S- 15-20 B-30-40, S-20-25 6-8 hrs
6. Sand the surface with emery paper No. 320 and wipe
7. Saffro’s STAR velvet glow emulsion by Brush, Spray, Roller Water B-60-70, S-70-75 B-20-30, S-20-25 3-4 hrs
8. Saffro’s STAR velvet glow emulsion by Brush, Spray, Roller Water B-60-70, S-70-75 B-20-30, S-20-25 3-4 hrs
9. (B=Brushing, S=Spraying)
10. N.B. For Exterior purpose we recommended Saffro’s WALL PROTECT Exterior Wall Primer.
11. Safety Features : Non-flammable
12. Pack Sizes: 1 Litre, 4 Litre, 10Litre, 20 Litre.